KL16K4T12 BARRIER LIFT
The KL16K4T12 Barrier Lift has a 4 to 12 inch grip range to handle jersey wall easily. This jersey barrier lift has a 16000 pound capacity and hooks up with our recommended RigMax16800. The grip range was designed to have a 4″ minimum grip specifically for T-Wall. It is suggested to purchase alignment legs with this lifter.
FREE SHIPPING TO LOWER 48 STATES
Wear Items:
- Medium Actuator
- (2) 6″ X 36″ pads
Kenco created the first barrier lift 30 years ago. It is our flagship product! There is simply no other barrier wall clamp that compares! It is the strongest, safest, most-trusted barrier picker in the industry. See why this is the choice of every major contractor and governmental agency in the United States.
The mechanical scissor action grips concrete automatically. By positioning and setting the Kenco Barrier Lift onto the wall, the lifting process begins. Elastomer pads clamp tightly against the wall surface. There are no auxiliary hydraulic hookups required. You can see more information in the Kenco lifting device manuals.
Free-swiveling pad angles adjust to match the slope of the wall. Both single slope and F-shape barrier wall are held securely during the process.
Once set firmly back on the ground and tension is released, the wall is released automatically. This action continues with each cycle of the barrier grab.
Standard models can be used on any median barrier with a 6-12″ top and range in capacities from 9,000 to 40,000 pounds. Custom models can be built to accommodate any barrier you need to grab. If you need even more lifting capacity, we now offer the Kenco double barrier lifter!
