SELF-LEVELING PIPE HOOK
The Self Leveling Pipe Hook is an excavator attachment that provides a safe and efficient way to place, move and set 8 foot sections of pipe. This particular model of the Pipe Hook has a built-in cylinder that automatically adjusts the weight of the pipe to achieve the proper balance point.
Kenco pipe lifts will handle any shape or type of 8 foot pipe sections, and this c-hook pipe lifter is also available as a mechanical pipe hook.
Kenco below the hook lifting products are designed, manufactured and tested in compliance with the latest revisions of the ASME B30.20 and BTH-1 standards and are accepted by OSHA, CanOSHs, as well as virtually all other world wide standards.
Every lifting device is hand tested by our engineering staff before it leaves our facility.
The only self leveler in the industry, this exclusive balancing mechanism is housed inside the hook body. The operator simply slides the hook fully into the pipe, then lifts and moves it to the destination. The weight of the pipe automatically levels itself. Self-leveling models are available up to 9000 pound capacities.
These box culvert wings are designed specifically for the job at hand. They are attached via a keyway system to each side of the hook’s main body. The mechanics of the lift process remain the same as for lifting RCP. The operator approaches the culvert from the side to insert the hook. The wings then help to stabilize and balance the culvert assuring that no tilting or twisting occurs during the lift process. Each lift happens in a single smooth motion with the set and release step occurring just as quickly. It’s a safe and efficient way to increase your productivity while saving you from purchasing multiple lifts for each job individually.
